EFFICIENCY OF CMMS (COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEM) PROJECT STAGES WITH K-MEANS

Farid Sukmana
Fahrur Rozi


DOI: https://doi.org/10.29100/jipi.v9i1.5453

Abstract


This study scrutinized four CMMS (Computerized Maintenance Management System) development projects using the K-Means clustering method to evaluate stages that require improvement by the GrX team. The projects under consideration were named Tim, Lix, Akb, and Mnk. The results indicated that the Tim project leaned more towards efficient CMMS development stages, while the Lix and Akb projects were predominantly in less efficient clusters at the implementation stages. The Mnk project had stages in less efficient clusters located at stages other than implementation processes. This suggests that each project has its unique challenges in achieving efficiency. However, the overarching conclusion is that the GRX team needs to enhance efficiency in the CMMS software development process. Several stages need to be evaluated, particularly the “data analysis and coordination” and “implementation of asset, work order, preventive and spare part modules” stages. Inefficiency occurs when the designing work time has a value lower than twice the workload. The K-Means algorithm was employed in the clustering process because it was believed that the data to be grouped was well-suited for implementation with this algorithm. The variables involved in this study were time and workload. This research provides valuable insights into the efficiency of CMMS development projects and offers a roadmap for future improvements.

Full Text:

PDF

Article Metrics :

References


H. Mohd Noor, S. A. Mazlan, and A. Amrin, “Computerized Maintenance Management System in IR4.0 Adaptation - A State of Im-plementation Review and Perspective,” IOP Conf Ser Mater Sci Eng, vol. 1051, no. 1, p. 012019, Feb. 2021, doi: 10.1088/1757-899X/1051/1/012019.

A. J. J. Braaksma, W. Klingenberg, and J. Veldman, “Failure mode and effect analysis in asset maintenance: a multiple case study in the process industry,” Int J Prod Res, vol. 51, no. 4, pp. 1055–1071, Feb. 2013, doi: 10.1080/00207543.2012.674648.

S. M. Arachchi, S. C. Chong, and A. Kathabi, “System Implementation Failures in the ERP Development Process,” Journal of Com-puter and Communications, vol. 07, no. 12, pp. 112–127, 2019, doi: 10.4236/jcc.2019.712011.

F. Beniacoub, F. Ntwari, J.-P. Niyonkuru, M. Nyssen, and S. Van Bastelaere, “Evaluating a computerized maintenance management system in a low resource setting,” Health Technol (Berl), vol. 11, no. 3, pp. 655–661, May 2021, doi: 10.1007/s12553-021-00524-y.

D. Meira, I. Lopes, and C. Pires, “Selection of computerized maintenance management systems to meet organizations’ needs using AHP,” Procedia Manuf, vol. 51, pp. 1573–1580, 2020, doi: 10.1016/j.promfg.2020.10.219.

F. Beniacoub, F. Ntwari, J.-P. Niyonkuru, M. Nyssen, and S. Van Bastelaere, “Evaluating a computerized maintenance management system in a low resource setting,” Health Technol (Berl), vol. 11, no. 3, pp. 655–661, May 2021, doi: 10.1007/s12553-021-00524-y.

J. M. Framinan, R. Leisten, and R. Ruiz García, “Guidelines for Developing Scheduling Systems,” in Manufacturing Scheduling Sys-tems, London: Springer London, 2014, pp. 353–369. doi: 10.1007/978-1-4471-6272-8_14.

J. Cooper, “Software Development Management Planning,” IEEE Transactions on Software Engineering, vol. SE-10, no. 1, pp. 22–26, Jan. 1984, doi: 10.1109/TSE.1984.5010194.

M. Faisal, E. M. Zamzami, and Sutarman, “Comparative Analysis of Inter-Centroid K-Means Performance using Euclidean Distance, Canberra Distance and Manhattan Distance,” J Phys Conf Ser, vol. 1566, no. 1, p. 012112, Jun. 2020, doi: 10.1088/1742-6596/1566/1/012112.

Md. Z. Hossain, Md. N. Akhtar, R. B. Ahmad, and M. Rahman, “A dynamic K-means clustering for data mining,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 13, no. 2, p. 521, Feb. 2019, doi: 10.11591/ijeecs.v13.i2.pp521-526.

S. Aryanti, D. Mahdiana, and A. Setiadi, “Penerapan Metode K-Means Dan Apriori Untuk Pemilihan Produk Bundling,” Journal CERITA, vol. 8, no. 1, pp. 1–12, Feb. 2022, doi: 10.33050/cerita.v8i1.2126.

A. A. Amer, “On K-means clustering-based approach for DDBSs design,” J Big Data, vol. 7, no. 1, p. 31, Dec. 2020, doi: 10.1186/s40537-020-00306-9.

S. V. G. Devi and C. Nalini, “Performance Analysis of K-means clustering based Hyperbolic Tangent Instituted Classification of Au-tomated Coding Contracts,” in 2020 3rd International Conference on Intelligent Sustainable Systems (ICISS), IEEE, Dec. 2020, pp. 489–497. doi: 10.1109/ICISS49785.2020.9315994.

R. Annisa, D. Rosiyadi, and D. Riana, “Improved point center algorithm for K-Means clustering to increase software defect predic-tion,” International Journal of Advances in Intelligent Informatics, vol. 6, no. 3, p. 328, Nov. 2020, doi: 10.26555/ijain.v6i3.484.

E. Kula, E. Greuter, A. van Deursen, and G. Gousios, “Factors Affecting On-Time Delivery in Large-Scale Agile Software Develop-ment,” IEEE Transactions on Software Engineering, vol. 48, no. 9, pp. 3573–3592, Sep. 2022, doi: 10.1109/TSE.2021.3101192.

M. Á. Vega-Velázquez, A. García-Nájera, and H. Cervantes, “A survey on the Software Project Scheduling Problem,” Int J Prod Econ, vol. 202, pp. 145–161, Aug. 2018, doi: 10.1016/j.ijpe.2018.04.020.

J. L. Leal, J. P. Rodríguez, and O. A. Gallardo, “Project time: Time management method for software development projects-analytical summary,” J Phys Conf Ser, vol. 1126, p. 012030, Nov. 2018, doi: 10.1088/1742-6596/1126/1/012030.

P. Ozor, E. Nwobodo-Anyadiegwu, and C. Mbohwa, “COMPUTERISED SOFTWARE SYSTEMS IN REPLACEMENT MAINTENANCE INFORMATION MANAGEMENT: A SOUTH AFRICAN CASE STUDY,” South African Journal of Industrial En-gineering, vol. 31, no. 3, Nov. 2020, doi: 10.7166/31-3-2420.

F. Sukmana and F. Rozi, “Decision Support System On Computer Maintenance Management SystemUsing Association Rule and Fish-er Exact Test One Side P-Value,” TELKOMNIKA (Telecommunication Computing Electronics and Control), vol. 15, no. 4, p. 1841, Dec. 2017, doi: 10.12928/telkomnika.v15i4.5880.

O. E. Iluore, A. Mamudu Onose, and M. Emetere, “Development of asset management model using real-time equipment monitoring (RTEM): case study of an industrial company,” Cogent Business & Management, vol. 7, no. 1, p. 1763649, Jan. 2020, doi: 10.1080/23311975.2020.1763649.

D. Addis Nigussie and M. Avvari, “Implementation of Computerized Maintenance and Management System in Wine Factory in Ethio-pia: A Case Study,” in Operations Management - Emerging Trend in the Digital Era, IntechOpen, 2021. doi: 10.5772/intechopen.93007.

F. Sukmana* and F. Rozi, “Software Design and Development for Optimizing Quality Assurance Assessments,” International Journal of Recent Technology and Engineering (IJRTE), vol. 8, no. 3, pp. 3384–3389, Sep. 2019, doi: 10.35940/ijrte.C5029.098319.

D. T. Pham, S. S. Dimov, and C. D. Nguyen, “Selection of K in K -means clustering,” Proc Inst Mech Eng C J Mech Eng Sci, vol. 219, no. 1, pp. 103–119, Jan. 2005, doi: 10.1243/095440605X8298.